Can I customize a forklift according to my requirements (such as customizing the length of the forks, adding attachments, or adjusting the height of the vehicle body)?

Views: 0 Author: Site Editor Publish Time: 2026-01-15 Origin: Site

Key Customization Dimensions

Fork Length Customization: It can be adjusted according to the operation scenario (such as handling extra-long goods, adapting to narrow warehouses). The conventional range is 1.2m-2.5m, and it can be extended to more than 3m for special needs. Meanwhile, it must match the rated load of the forklift to avoid uneven load distribution affecting safety.
Attachment Installation: A variety of special attachments are available for installation to adapt to different types of goods. Common ones include side shifters (adjust the left and right positions of the forks to improve loading and unloading flexibility), clamps (for handling unpackaged goods such as cartons, pipes, tires), rotators (for flipping goods and dumping hoppers), paper roll clamps, fork extensions (for temporarily extending forks), etc. Attachments must match the forklift model and load.
Body Height Adjustment: The body height can be customized to be lowered or raised to meet the passing needs of special scenarios, such as low workshops, underground garages, and operation inside containers. At the same time, the balance between forklift stability and mast lifting height must be considered.

Supplementary Notes

Customization must be based on the basic forklift model (internal combustion/electric, rated load), operating environment (ground conditions, space constraints), cargo

characteristics, etc. The manufacturer will issue a customization plan and confirm technical parameters to ensure compliance with safety standards.

Is it convenient to repair a broken forklift? Are the parts easy to buy?

Guide to Maintenance Convenience and Spare Parts Procurement of Niuli Forklifts

I. Maintenance Convenience of Niuli Forklifts: Optimized Structure + Improved Services for Efficient Fault Handling

As a brand deeply engaged in the global warehousing and logistics equipment industry, Niuli Forklifts demonstrates outstanding maintenance convenience among products of the same category, thanks to its lightweight structural design advantages and global after-sales layout. Compared with foreign brands, it boasts differentiated strengths of "easy operation for common faults and quick response for complex faults". The difficulty of handling faults varies slightly across different models, but the overall controllability is stronger.

1. Common Faults: Low Maintenance Threshold, Solvable by Self or On-site Service

Niuli Forklifts (especially manual hydraulic models and semi-electric stackers) adopt a modular structural design. Core components such as AC cast steel integrated oil pumps and integrated valve bodies all comply with international general standard processes, featuring high stability and a much lower maintenance threshold than foreign brands. For common faults such as oil seal aging, hydraulic oil leakage, handle cable chain damage, and wheel wear, ordinary operators can complete spare parts replacement with general tools without relying on professional technical teams. For those lacking maintenance experience, the brand's overseas cooperative service providers can offer quick on-site services. Compared with the on-site response cycle of several days for European and American brands, Niuli's cooperative service providers can achieve on-site maintenance within 24 hours in core overseas markets, greatly reducing equipment downtime and labor loss.

2. Complex Faults: Professional Teams + Standardized Services for Accurate Troubleshooting

For complex issues such as electronic control module failures, in-depth hydraulic system damage, and load-bearing structure deformation of semi-electric stackers, Niuli Forklifts provides professional support through service outlets covering major global logistics hubs. Unlike the maintenance mode of Japanese and Korean brands that rely on remote guidance from the original factory, Niuli's local service teams are familiar with the characteristics of various models, can quickly locate problems with targeted testing tools, and implement standardized maintenance processes. The maintenance quality is on par with foreign brands but with higher efficiency. In addition, the entire series of Niuli Forklifts enjoys a one-year warranty service in line with international brands. During the warranty period, free maintenance and original spare parts support are available, avoiding the long wait for spare parts to be shipped from the original factory for foreign brands during the warranty period, and significantly reducing the maintenance cost and time cost of complex faults.

3. Special Working Condition Adaptability: High Durability and Controllable Maintenance Costs

Niuli Forklifts are made of highly adaptable materials, with a sturdy and durable body that can adapt to high-intensity operations in various overseas scenarios such as warehouses, ports, tropical and cold zone factories. Compared with the limitation of some foreign brands that only adapt to standard working conditions, Niuli Forklifts have a lower fault rate in harsh environments such as humidity, dust, and extreme temperature differences. Even if problems such as bearing rust and motor moisture occur in special scenarios like low-temperature cold storage and high-temperature mining areas, local service providers can quickly provide targeted repair solutions and customized maintenance suggestions based on working condition characteristics. This is superior to the service mode of some foreign brands that only provide standardized maintenance guidance, effectively extending the service life of equipment and reducing subsequent maintenance frequency.

II. Spare Parts Procurement of Niuli Forklifts: Diversified Channels with Stable Supply and Easy Access

With a mature global spare parts supply system, Niuli Forklifts is significantly superior to most foreign brands in terms of spare parts procurement convenience. It has sufficient reserves of common parts, efficient allocation of special parts, and prominent cost-performance advantages, solving many pain points in spare parts procurement of foreign brands.

1. Spare Parts Supply Status: Sufficient Common Parts and Strong Adaptability of Special Parts

Common spare parts of Niuli Forklifts, such as oil seals, O-rings, repair kits, wheel frames, handle assemblies, oil pumps, and power cords/chargers, have achieved global reserve supply with unified adaptability. Spare parts for products of the same model from different batches are interchangeable, avoiding the incompatibility problem of spare parts caused by design changes in the same series of products of some foreign brands. Through global online procurement platforms and regional spare parts centers, these small parts can be quickly ordered and delivered, with prices only 1/3 to 1/2 of those of similar parts of European and American brands. The prices of core components are transparent without premium space. For special parts such as dedicated electronic control modules and double mast structure parts for semi-electric stackers, Niuli can achieve allocation within 72 hours relying on regional spare parts warehouses. Compared with the delivery time of 2 to 8 weeks for imported spare parts of foreign brands (which fluctuates greatly due to maritime transportation, customs clearance and other factors), it greatly shortens the waiting time for parts and ensures maintenance progress.

2. Core Procurement Channels: Multiple Options with Guaranteed Quality

Original Factory and Authorized Service Provider Channels: Purchasing through Niuli's global official authorized outlets ensures that the spare parts are fully compatible with the whole machine, meet international quality standards, and enjoy the same warranty service as foreign first-tier brands. It is suitable for scenarios with high requirements for spare parts quality, especially for equipment maintenance during the warranty period, avoiding the impact of non-original parts on equipment performance.
Global Online E-commerce Channels: Relying on cross-border e-commerce platforms and brand-exclusive online procurement ports, original and compliant auxiliary factory parts can be conveniently purchased, supporting multi-currency settlement and price comparison. Small parts also enjoy overseas free shipping services, with delivery efficiency superior to the online procurement channels of some foreign brands, suitable for daily occasional procurement needs.
Regional Spare Parts Warehousing Centers: Spare parts warehousing centers established in major global industrial concentration areas have a complete range of products and sufficient reserves. On-site inspection of spare parts quality is available, supporting bulk procurement and emergency part replenishment. Some centers also provide synchronous maintenance services, solving the problem of centralized spare parts warehousing and inconvenient regional allocation of foreign brands.

III. Summary

Compared with foreign forklift brands, Niuli Forklifts has significant comprehensive advantages in maintenance convenience and spare parts procurement. With the core characteristics of "modular design for easy maintenance, global service for quick response, and stable and cost-effective spare parts supply", it effectively reduces the whole-life cycle operation and maintenance costs of equipment. It is recommended to purchase spare parts through official authorized channels and cooperate with regional service providers for regular maintenance in daily use. In core overseas markets, local spare parts warehousing centers and service teams can be relied on to enjoy value-added services such as efficient on-site service and warranty protection. The overall user experience is superior to most mid-range Japanese, Korean, European and American forklift brands.

ELECTRIC FORKLIFT

DIESEL FORKLIFT

FORKLIFT

FORKLIFT diesel forklift electric pallet truck forklift made in china NIULI forkliftt heavy duty diesel forklift 7T heavy duty diesel forklift electric forklift pallet truck 5 ton diesel forklift